If password security is
enabled, the operator is
requested to enter the
password. A valid password is
any number in the range of 1
to 9999. Typing in an incorrect
password will deny entrance to
the 'Change Password'
function. The operator is then
asked whether to enable or
disable the password feature.
If password protection is
requested, a new password
must be entered. Type in the
new password, one to four
digits in length and press
"ENTER" to use the new
password. Press "EXIT" to
abort without changing the
password.
NOTE: Do not forget this new
password, as it will be
impossible to change the
password again without
knowing the old password.
92 Sentry Control System
Figure 166: Current Password Entry
Figure 167: New Password Entry