If password security is
enabled, the operator is
requested to enter the
password after selecting the
desired group of machines.
The password must correspond
with the system password.
Typing in an incorrect
password will deny entrance to
the 'Change Setpoints' screen.
After the operator has pressed
"ENTER" from the menu, they
are asked to select the machine
they would like to change. The
cursor can be moved one
machine at a time by using the
arrow keys, or it can be moved
a full screen by using "PAGE
UP/DOWN" keys. The
"HOME" and "END" keys
move the cursor to the
corresponding point on the
machine list.
When the cursor highlights
the desired machine, press
"ENTER" to change the
selected machine's setpoint, or
"EXIT" to return to the machine menu.
12 Sentry Control System
Figure 7: Password Entry
Figure 8: Machine List