Figure 104: Password Entry; Figure 105: Date Entry - Jamesway Sentry Manual

If password security is enabled
(version 1.20 or newer only),
the operator is requested to
enter the password. An
incorrect password denies
entrance to the 'Set Date'
function.
Enter the new date in the
format shown. All three values
must be entered, using two
digits for each. For example,
the number 1 must be entered
as '01'. The new date will not
take effect until the next step is
completed. Press "ENTER"
when all numbers are entered,
or press "EXIT" to abort
without changing the date.

Figure 104: Password Entry

Figure 105: Date Entry

Sentry Control System 61