Here the operator can edit the
'Humidity Control Setup' for
the specified machine. The
default variables shown under
the cursor can be used by
selecting "ENTER", or new
variables can be entered using
the "SELECT" key. The Auto
Damper can be either enabled
or disabled. The humidity pan
can be set to fill at any day
from day 1 to day 14. If a
value is entered outside the
specified range, an 'Entry
Error' message will appear.
Pressing "EXIT" will return to
the previous submenu without
making any changes to the 'Humidity Control' setup.
Once the desired Humidity
Control variables have been
entered, the operator has two
options: 'Abort' returns to the
previous screen without
altering the Humidity Control
setup, and 'Send Humidity
Setup' sends the new values to
the specified machine and
activates the new Humidity
Control variables immediately.
34 Sentry Control System
Figure 51: Humidity Control Setup
Figure 52: Send Humidity Control Setup