Network Turn Setup; Figure 120: Turn Setup; Figure 121: Password Entry - Jamesway Sentry Manual

5.3.3 Network Turn Setup

The Network 'Turn Setup'
function is similar to the one
found under the 'MACHINE'
menu, except that this function
will edit the turn setup for all
machines of a given type.
Turning can be either enabled
or disabled at a specified day
within the cycle. The
frequency of the turn interval
can also be set. To change the
'Turn Setup' features for all
machines of a particular type,
press "ENTER" when 'Turn
Setup' is highlighted. To
change the alarm setup on one
machine only, refer to the 'Turn
Setup' section on Page 300.
If password security is
enabled, the user is requested
to enter a password after
selecting the desired group of
machines. An incorrect
password denies entrance to
the Network 'Turn Setup'
screen.

Figure 120: Turn Setup

Figure 121: Password Entry

Sentry Control System 69