Network Alarm Ranges; Figure 116: Alarm Ranges; Figure 117: Password Entry - Jamesway Sentry Manual

5.3.2 Network Alarm Ranges

The Network 'Alarm Ranges'
function is similar to the one
found under the 'MACHINE'
menu, except that this function
will edit the alarm ranges for all
machines of a given type. This
function can also be used to
copy the alarm ranges from one
machine to another if they are
of the same type. Press
"ENTER" to display the
submenu showing the different
machine types. To change the
alarm setup on one machine
only, refer to the 'Alarm Setup'
section on Page 25.
If password security is
enabled, the user is requested
to enter a password after
selecting the desired group of
machines. An incorrect
password denies entrance to
the Network 'Alarm Ranges'
screen.

Figure 116: Alarm Ranges

Figure 117: Password Entry

Sentry Control System 67