Figure 81: Send Machine Reset - Jamesway Sentry Manual

The operator may abort the
machine reset by choosing
'Abort' or by pressing the
"EXIT" key. A 'Reset
Machine' command may also
be sent to the selected machine
by highlighting the desired
option using the "UP" and
"DOWN" arrow keys and
pressing "ENTER". If the
machine's fans were turned on
when resetting, they will turn
off for a few seconds while the
machine re-initializes. The
machine may also create
several alarms during

Figure 81: Send Machine Reset

reinitialization.
Sentry Control System 49