Figure 57: Password Entry; Figure 58: Machine List - Jamesway Sentry Manual

If password security is
enabled, the user is requested
to enter a password after
selecting the desired group of
machines. An incorrect
password denies entrance to
the 'Change Override'
function.
After the override time has
been entered, the operator is
asked to select the machine for
which they would like to
change the alarm override. The
cursor can be moved one
machine at a time using the
arrow keys, or moved a full
screen by using the "PAGE
UP/DOWN" keys. The
"HOME" and "END" keys
move the cursor to the
corresponding point in the
machine list.
When the desired machine is
highlighted, press "ENTER" to
change the alarm override, or
"EXIT" to abort the function.

Figure 57: Password Entry

Figure 58: Machine List

Sentry Control System 37