Network Copy All Profiles; Figure 152: Send Copy Profile; Figure 153: Copy All Profiles - Jamesway Sentry Manual

This dialog box asks for
confirmation from the operator
before the profile is copied.
Selecting 'Abort' or pressing
"EXIT" will abort this
function without copying the
profile. Choose 'Copy Profile'
using the arrow keys and press
"ENTER" to transfer the
profile.
NOTE: If any of the machines
receiving the new profile are
currently using a profile from
an affected slot, they will
automatically adjust the

Figure 152: Send Copy Profile

setpoints to reflect the new
profile.

5.5.3 Network Copy All Profiles

This function allows all profiles
to be copied from one machine
to another machine or to a
group of machines. Only
'Valid' profiles will be
transferred. This function is
most useful to reprogram a
machine after its processor
board (PTA410) has been
replaced.

Figure 153: Copy All Profiles

Sentry Control System 85