Figure 132: Override Duration; Figure 133: Alarm Override Editing - Jamesway Sentry Manual

This box asks for the duration
the alarm override is to be
active. The default value
shown under the cursor can be
selected by pressing
"ENTER", or a new value can
be entered using the numeric
keys and the "CLEAR" key to
delete the last digit. Only times
in the range of 0.1 hours (6
minutes) to 24.0 hours are
accepted. An 'Entry Error'
message is displayed if the
entered value is outside this
range. Pressing "EXIT" will
return to the submenu without

Figure 132: Override Duration

making any changes to alarm
override.
The operator selects which
alarm(s) are to be overridden
by moving the cursor to the
alarm mode field and pressing
"SELECT" to toggle the field
between 'Normal' and
'override'. Once the
appropriate alarms have been
selected, press "ENTER" to
continue, or "EXIT" to abort
changes and return to the
submenu listing the different
machine types.

Figure 133: Alarm Override Editing

Sentry Control System 75