Network Copy Profile; Figure 144: Send Profile; Figure 145: Copy Profile - Jamesway Sentry Manual

The operator must confirm the
sending of the new profile by
moving the highlight bar to the
'Send Profile' position using
the arrow keys and then
pressing the "ENTER" key.
Pressing the "EXIT" key or
choosing 'Abort' will leave the
profiles unchanged at the
machine controller. If any of
the machines receiving the
new profiles are currently
using a profile from an
affected slot, they will
automatically adjust the
setpoints to reflect changes
made in the profile.

5.5.2 Network Copy Profile

This function allows the
operator to copy a profile from
one machine to another
machine, or to copy a profile
from one machine and send it
to all machines of a given
machine type. 'Copy Profile' is
essentially the same as 'Edit
Profile', except that it lacks the
step where the profile can be
edited.

Figure 144: Send Profile

Figure 145: Copy Profile

Sentry Control System 81