If password security is
enabled, the operator is
requested to enter the
password after selecting the
desired group of machines.
An incorrect password denies
entrance to the 'Alarm Setup'
screen.
After the operator has selected
the 'Alarm Setup' function,
they are asked to select the
type of machine from which
they would like to load the
alarm setup. The cursor can be
moved one machine at a time
by using the arrow keys or it
can be moved a full screen by
using the "PAGE UP/DOWN"
keys. The "HOME" and
"END" keys move the cursor
to the corresponding point in
the machine list. When the
cursor is highlighting the
desired machine, press
"ENTER" to view the alarm
setup for the selected machine, or press "EXIT' to abort the function.
64 Sentry Control System
Figure 110: Password Entry
Figure 111: Machine List