Figure 42: Send Alarm Range; Figure 41: Password Entry - Jamesway Sentry Manual

Here the operator can edit the
Temperature and Humidity
Alarm ranges for the specified
machine. The default
temperature value shown
under the cursor can be used
by selecting "ENTER", or a
new value can be entered using
the numeric keys and the
"CLEAR" key to delete the
last digit. Accepted values are
between 0.2 and 0.7 degrees
for temperature (high range)
and 0.2 and 2.0 (low range),
and 2.0 and 10.0 for humidity
(both high and low range). An
'Entry Error' message is
displayed if the entered value is outside this range. Pressing "EXIT" will return to the previous submenu
without making any changes to the Alarm Range setup.
Once the desired Alarm
Ranges have been entered, the
operator has two options:
'Abort' returns to the previous
screen without altering the
Alarm Range setup, and 'Send
Alarm Range' sends the new
values to the specified machine
and activates the new Alarm
Range values immediately.

Figure 41: Password Entry

Figure 42: Send Alarm Range

Sentry Control System 29