Network Edit Profiles; Figure 136: Edit Profiles; Figure 137: Password Entry - Jamesway Sentry Manual

5.5.1 Network Edit Profiles

This 'Edit Profiles' function
can be used to edit profiles on
all machines of a specified type
at the same time, or the new
profile can be saved to a
machine other than the one it
was loaded from. Refer to
Section 3.4.1 on Page 17 for
instructions on changing the
profile on one machine only.
If password security is
enabled, the operator is
requested to enter the
password. An incorrect
password denies entrance to
the 'Edit Profiles' function.

Figure 136: Edit Profiles

Figure 137: Password Entry

Sentry Control System 77