Once the operator has entered
the desired targets, they will be
asked to choose one of three
options: 'Abort' returns to the
previous screen without
affecting the machine's current
setpoints, 'Send New
Setpoints' sends the new
targets to the machine (NOTE:
Alarms may occur if the
change is large), and 'Send &
Activate Override' sends the
new setpoints and also
activates the alarm override,
using parameters that must be
sent to machine before using
this feature. More information
on the alarm override function can be found in the 'Alarm Override' section on Page 29.
3.3 Dry Out
Dry out provides the operator
with the choice of drying the
machine after washing. This
function is only available for
hatcher and ACI machines.
Enabling this feature will open
the damper completely for a
specified amount of time,
allowing moisture to escape
from the machine more quickly.
If dry out is currently enabled,
this function can also be used
to manually disable dry out
operation. After the specified
time period has elapsed, dry
out mode shuts off
automatically and damper
operation returns to normal.
14 Sentry Control System
Figure 11: Send New Setpoints
Figure 12: Dry Out Mode