Adjusting The Barcode Reader Position - Agilent Technologies 1200 Series User Manual

2 Installation
Figure 29
6 Connect all necessary power cords.
7 Switch ON all units.

Adjusting the Barcode Reader Position

The height of the barcode reader can be adjusted so that the reading is
continuously successful.
1 Place a plate with a barcode on the transport position of the Automation
2 Loosen the two screws at either side of the barcode reader mounting plate
Figure 30
36
Rear panel of the Well-plate Handler
Interface.
(see Figure 30), so that the barcode reader height can be adjusted.
Adjusting the barcode reader position
Agilent 1200 Series Sample Capacity Extension User Manual