NEC Xen Master Programming Manual page 64

NEC Business Solutions Ltd
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + AH
3 Press the corresponding CO/PBX line key to change the tenant number.
Speed Dial buffers have nine groups. These groups are listed in the table below.
Speed Dial
Buffer No.
80 Codes
0X 00~09
1X 10~19
6X 60~69
7X 70~79
8X
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K I
~ to enter numeric data
S
to move to the next page
T
to move to the previous page
Each time a CO/PBX line key is pressed, the LED toggles between On and Off.
CO/PBX
Line LED
Data
4 After entering all pages for the selected Speed Dial Buffer No., press
displayed.
5 After entering data for all of the Speed Dial Buffer Nos., press
Memory Block is displayed.
P
6 Press to go back on-line.
Related Programming
M.B. Number
1-1-33 Speed Dial Number/Name Display Selection
1-1-35
Speed Dial Buffer Allocation
4-09
Telephone to Tenant Assignment
N
1. One or more tenants can be enabled to use each group.
2. Use this Memory Block to assign which tenants use each group.
3. When speed dial is set to 1000, 900~999 cannot be restricted.
4. The X in each Speed Dial Buffer No. is displayed even if it is not entered.
5. In Memory Block 1-1-18 System Speed Dial Restriction by Tenant, tenant numbers 00~07 are assigned to Flexible
Line keys on the first page. Tenant numbers 08~15 are assigned to the Flexible Line keys on the second page. The
tenant number corresponding to Flexible Line key 1 of the current page is displayed on the right side of the display. In
all cases, each page is represented by eight line keys.
1 - 46
to access the Memory Block.
Speed Dial Number
1000 Codes
000~099
100~199
600~699
700~799
N/A 800~899
Off
Restricted Not restricted
X = Any digit 0~9
On
N
to write the data. The next Speed Dial Buffer No. is
N
to write the data for the last Speed Dial Buffer No. The next
Memory Block Name
Xen Master & Xen Axis
Default Values
All System Speed Dial buffers can
be dialled from any tenant.
System Speed Dial Restriction by Tenant