NEC Xen Master Programming Manual page 37

LK 1 System Mode
LK 8 PBR/Miscellaneous (Continued)
Data
Memory Block Name
No.
31 Hold Tone Source Selection
32 Hold Internal Tone Volume Selection
33 Master Clock Selection
35 COM Port Baud Rate Setting
Assignment
36 COM Port Parity/Stop Bit Setting
Assignment
37 General Purpose Relay Assignment
38 Modem Port for Remote Programming
Assignment
40 ACD Hunt Timer
47 CAR for Voice Mail Message Notice
Assignment
LK 1 System Mode
LK 9 DISA
Data
Memory Block Name
No.
00 DISA/ID Code Assignment
02 DISA/ID Password Effect/Invalid
Selection
LK 1 System Mode
LK 11 (Not Used)
Programming Manual
Default Value
Internal
0 dB
Cabinet No. = 0
(No Assign)
COM 1: 38.4 Kbps
COM 2: 4.8 Kbps
COM 3: 4.8 Kbps
COM 4: 9.6 Kbps
COM 1~4: None/1
No
Not Specified
10 sec.
Not Specified
Default Value
Refer to DISA/ID Code Assignment on page 1-229.
DISA Password Effect
(Yes)
Programming Values
Internal or External
0 dB, -6 dB
Cabinet: 0~3
Slot: 1~8
COM 1~4: 4.8 Kbps, 9.6 Kbps, 19.2 Kbps,
38.4 Kbps
COM 1~4: None/1, None/2, Even/1, Odd/1
Yes = Assigned, No = Not Assigned
Station No.
2 Digit = 00~99
3 Digit = 000~999
4 Digit = 0000~9999
10 sec., 20 sec., 30 sec., 60 sec., 120 sec.,
240 sec., No Limit.
Any unused CAR
Programming Values
DISA Password Invalid (No)
DISA Password Effect (Yes)
May 2003
1 - 19