NEC Xen Master Programming Manual page 278

NEC Business Solutions Ltd
Programming Procedures
1 Go off-line.
2 Press LK2 + KG to access the Memory Block.
3 Press the CO/PBX Line key. The LED indication changes to indicate the data each time
the CO/PBX line key is pressed.
Note: Use the following to enter data:
J to move the cursor left
L
to move the cursor right
K ~ I to enter number data
S
to go to next page
T
to go to previous page
CO/PBX
Line LED
Data
4 After entering data for all pages, press
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-1-35 Speed Dial Buffer Allocation
1-8-07
Class of Service (Attendant) Feature Selection 1
N
1. If Deny is specified, no display is presented even when a System Speed Dial call is originated.
2. Divide the Speed Dial numbers into groups and specify, per tenant, whether confirmation is allowed or denied.
3. Station Message Detail Recording (SMDR) prints telephone numbers.
1 - 260
Off
No
Yes
(Not
(Assigned)
Assigned)
N
to write the data.
On
There is no default setting.
Memory Block Name
Xen Master & Xen Axis
Default Values
All Speed Dial confirmation allowed.
System Speed Dial Display Assignment