NEC Xen Master Programming Manual page 316

NEC Business Solutions Ltd
Automatic Release Selection
General Description
This Memory Block specifies whether or not the system is to release a trunk used to make
an outgoing call when the called party hangs. Selecting Yes will result in the system
disconnecting the trunk upon the outside party hanging up. Selecting No will result in the
trunk being held upon the outside party hanging up, the trunk only being released when the
KTS extension hangs up.
Display
CO/PBX
No.
Data
(01~64)
No.
0 1 / 3 9 : A U T O R L S
T I M E
Settings
LK1 LK2
No Yes
LK5 LK5
Programming Procedures
1 Go off-line.
N
2 Press LK3 + + CI
3 Press the corresponding CO/PBX line key to change the data option
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
The attendant telephone position must dial an Access Code to activate this feature.
1 - 298
Setting
Title
Data
= Y S
D I S P L A Y
LK3 LK4
The shaded area indicates the default setting.
LK7 LK8
to access the Memory Block.
Xen Master & Xen Axis
3-39
System Mode
3
Submode
—
Data No.
39
PC Programming
a
+BCT
Automatic Release Selection