NEC Xen Master Programming Manual page 41

Hide thumbs Also See for Xen Master:
Table of Contents

Advertisement

LK 3 CO/PBX Line Mode (Continued)
Data
Memory Block Name
No.
29
Trunk Internal Transmit Pad Selection
30
Trunk Internal Receive Pad Selection
31
Trunk External Transmit Pad Selection
32
Trunk External Receive Pad Selection
33
Disconnect Recognition Time Selection
38
Automated Attendant Message to
Trunk Selection
39
Automatic Release Selection
41
ACD/UCD Delay Announcement
Assignment
42
DIT Assignment
43
ANA Assignment
44
Caller ID Display Assignment for CO/
PBX Line
45
Live Recording Trunk Selection
52
ISDN Trunk Directory Number
Assignment
53
Caller Name Indication Selection
59
Automated Attendant Function
Selection
61
DIT Delay Answer Timer Selection
62
DIT Tenant Assignment
63
DIT Holiday Mode Enable
64
DIT Night Mode Delay Answer Enable
65
Hold Tone Automated Attendant
Selection
67
CO Line Ringing Pattern Selection for
CO/PBX Line Mode
Programming Manual
Default Value
2 dB
4 dB
0 dB
0 dB
2.0 sec.
Message 1
Yes
Refer to ACD/UCD Delay Announcement Assignment on page 1-299.
No Assignment
No Assignment
Not Specified
No
Not Specified
Trunk Name
Normal
Trunks (1-64) = 0 sec.
All CO/PBX Lines are
set to tenant 00
Holiday DIT = YES
Night DIT = NO
All CO/PBX lines are
set to "NON"
— = NON
Programming Values
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB,
-3 dB, 0 dB
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB,
-3 dB, 0 dB
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB,
-3 dB, 0 dB
2 dB, 4 dB, 6 dB, 8 dB, 12 dB, 16 dB, 3 dB,
-3 dB, 0 dB
0 sec., .2 sec., .3 sec., .5 sec., .7 sec.,
.9 sec.,
1.0 sec., 1.2 sec., 1.4 sec., 1.5 sec., 1.7
sec., 1.9 sec., 2.0 sec., 2.2 sec., 2.4 sec.,
2.6 sec.
Message 1~8
Yes, No
Station No.
Station No.
Telephone Port 01~96
No = No Live Recording
Yes = Live Recording
Up to 13 digit per a CO/PBX Port No.
No Indication, Caller No. Indication, Name
Indication (by SPD), Trunk Name
Normal, Delay Announcement
0s, 5s, 10s, 20s, 30s, 40s, 50s, 60s
Trunk (1-64) can be set to a tenant (00-47)
NO, YES
NO, YES
NON, MSG1, MSG2, MSG3, MSG4,
MSG5, MSG6, MSG7, MSG8
Pattern A~H
May 2003
1 - 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xen axis

Table of Contents