NEC Xen Master Programming Manual page 322

NEC Business Solutions Ltd
ISDN Trunk Directory Number
Assignment
General Description
Use this Memory Block to assign the Integrated Services Digital Network (ISDN) Directory
Number.
Display
CO/PBX
No. Data
(01~64) No.
0 1 / 5 2 :
T I M E
Programming Procedures
1 Go off-line.
N
2 Press LK3 + +
3 Enter Data using the Dial Pad:
Note: Use the following to enter data:
J to move the cursor left
L
to move the cursor right
K ~ I to enter numeric data
R
to go to the next CO/PBX Line No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. If CFE feature is to be used, the GDN number must be set for BRI.
2. If DID is used in conjunction with PRI, do not assign any number to CO.
3. Enter the Area Code as part of directory number, e.g. Melbourne = 3xxxx xxxx
1 - 304
Setting Data
(20 digits maximum)
D I S P L A Y
EB
to access the Memory Block.
Xen Master & Xen Axis
System Mode
Submode
Data No.
PC Programming
a
ISDN Trunk Directory Number Assignment
3-52
3
—
52
+AN