NEC Xen Master Programming Manual page 35

LK 1 System Mode
LK 6 DSS
Data
Memory Block Name
No.
01 Attendant Add-On Console to
Telephone Port Assignment
03 DSS Call Voice/Tone Signal Selection
05 Attendant Add-On Console Key
Selection
08 Attendant Transfer Selection During
Live Record
LK 1 System Mode
LK 7 ESP
Data
Memory Block Name
No.
00 Doorphone Assignment
01 Doorphone Display Time Selection
02 External Speaker Connection Selection
03 External Paging Alert Zone Selection
04 Doorphone Ringing Pattern Selection
05 Doorphone Ringing Frequency
Selection
06 External Paging Timeout Selection
07 External Ring Relay Cycle Selection
08 External Speaker Chime Selection
09 External Speaker Chime Start
Time Selection
LK 1 System Mode
LK 8 PBR/Miscellaneous
Data
Memory Block Name
No.
01 SLT or Automated Attendant/DISA to
PBR Selection
Programming Manual
Default Value
Refer to Attendant Add-On Console to Telephone Port Assignment on
page 1-175.
Voice
Refer to Attendant Add-On Console Key Selection on page 1-177.
Yes
Default Value
No
10 sec.
All Yes
Yes
On
C
5.0 min.
Pattern 3
Pre-Tone
700 ms.
Default Value
Off
Programming Values
Tone, Voice
No, Yes
Programming Values
No (Not Assign)/Yes (Assign)
10 sec., 30 sec., 60 sec., 90 sec.
No, Yes per Speakers (A~C)
Yes, No
Off, On, A~H
A~H
0.5 min., 1 min., 1.5. min., 2 min., 3 min.,
5 min., 8 min., No Limit
Pattern 1, 2, 3, 4, 5, 6, Continuous
Pre-Tone/Chime (Start)/ Chime (Both)
0~1500 msec = (Input value) x 100 msec
Programming Values
Off = Single Line Telephone
On = Automated Attendant/DISA
May 2003
1 - 17