NEC Xen Master Programming Manual page 355

Programming Manual
Intercom Master Hunt Number
Selection
General Description
Use this memory block to assign a master intercom number to each telephone.
Display
Tel Port
No.
Data
(01~99)
No.
A0~C0
0 1 / 1 4 : M S T E R
T I M E
Settings
LK 1 LK 2
No Yes
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK4 + AD to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option
Note: Use the following to change option:
R
to move to the next Tel Port No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
4-15
Intercom Master Hunt Number Forward Assignment
N
1. If Yes is assigned, an incoming internal call from another station, Automated Attendant transferred call, or DIT/ANA/
DID/Tie line designated call is forwarded to a station specified in Memory Block 4-15 Intercom Master Hunt Number
Forward Assignment if line is busy.
2. Telephone ports A0~C0 are ports 100~120.
Intercom Master Hunt Number Selection
Setting
Title Data
N O
D I S P L A Y
LK 3 LK 4
The shaded area indicates the default setting.
LK 7 LK 8
Memory Block Name
May 2003
4-14
System Mode
4
Submode
—
Data No.
14
PC Programming
a
+BTT
1 - 337