NEC Xen Master Programming Manual page 193

Programming Manual
Attendant Add-On Console to
Telephone Port Assignment
General Description
Use this Memory Block to assign an Attendant Add-On Console to a telephone port
number.
Display
Data
No. Title
0 1 : D S S
T I M E
Programming Procedures
1 Go off-line.
2 Press LK1 + LK6.
3 Use J to move cursor to the second Data No. position and press
4 Use the dial pad to enter the data.
Note: Use the following to enter data:
J to move the cursor left
L
to move the cursor right
K ~ I to enter numeric data
N
5 Press to write the data.
6 Change the data using the dial pad.
N
7 Press to write the data.
P
8 Press to go back on-line.
Related Programming
M.B. Number
7-2
Telephone Type Assignment
N
1. The telephone with an Attendant Add-On Console connected must be specified by port number.
2. A maximum of four Attendant Add-On Consoles can be connected to a system.
3. A maximum of four Attendant Add-On Consoles can be connected to one telephone.
Attendant Add-On Console to Telephone Port Assignment
DSS No. Setting
1~4 Data
1 = P 0 1
D I S P L A Y
A to access the Memory Block.
Default Values
DSS
1
2
3
4
Memory Block Name
May 2003
1-6-01
System Mode
1
Submode
6
Data No.
01
PC Programming
a
+BTD
Tel Port No.
› 01
› 02
› 01
› 02
1 - 175