NEC Xen Master Programming Manual page 32

NEC Business Solutions Ltd
LK 1 System Mode
LK 2 ICM (Continued)
Data
Memory Block Name
No.
23 System Call Park Recall Time
Selection
24 Intercom Feature Access Code
Assignment
25 Internal Paging Alert Tone Selection
26 Delayed Ringing Timer Assignment
(ICM)
28 PS Out of Area Tone Selection
30 PS Out of Area Timer Selection
(BSU only)
31 Call Pickup Group - Direct
LK 1 System Mode
LK 3 SLT
Data
Memory Block Name
No.
01 Bounce Protect Time Selection
02 SLT Hookflash Signal Selection
03 First Digit PBR Release Timer
Selection
04 Dial 1 (DP) Hookflash Selection
05 Hookflash Start Time Selection
06 Hookflash End Time Selection
07 Voice Mail Digit Add Assignment
1 - 14
Default Value
1 min.
Refer to Intercom Feature Access Code Assignment on page 1-130.
Tone YS
10 sec.
BT
12 sec.
All Blank
Default Value
300 ms.
Hold
10 sec.
Yes
40 ms.
HST + 100 ms.
All Blank
Xen Master & Xen Axis
Programming Values
0.5 min., 1.0 min., 1.5 min., 2.0 min., 3.0
min.,
5.0 min., 8.0 min., 10.0 min.
Tone YS
Tone No
00~99
BT (Busy), RBT (Ring Back)
00~99 sec.
0~9 groups. 30 Tel per group max.
Programming Values
Page 1:0 ms., 100 ms., 200 ms.,
300 ms., 400 ms., 500 ms.,
600 ms., 700 ms.
Page 2:800 ms. 900 ms., 1000 ms.,
1100 ms., 1200 ms., 1300 ms.,
1400 ms., 1500 ms.
Hold
Flash
10 sec., 20 sec., 30 sec., 40 sec., 50 sec.,
60 sec.
Yes, No
40 ms., 90 ms., 140 ms., 190 ms
240 ms., 290 ms., 340 ms.,
390 ms., 440 ms., 490 ms.
540 ms., 590 ms., 640 ms.,
690 ms., 740 ms., 790 ms.
Refer to Hookflash End Time Selection on
page 1-142.
0~9, *, # (up to 4 digits)
Multiline Terminal Programming