Programming Manual
Receiving Volume Selection
General Description
Use this Memory Block to specify whether receiving volume is returned to normal (DOWN)
or kept as is (UP) on a call after hanging up.
Display
Tel Port No.
(01~99)
Data
A0~C0
No.
0 1 / 9 2 : R C V
T I M E
Settings
LK 1
LK 2
Down
Up
LK 5
LK 6
Programming Procedures
1 Go off-line.
IB
2 Press LK4 +
to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Use the following to change option:
R
select next Tel Port No.
N
4 Press
to write the data.
P
5 Press
to go back on-line.
Related Programming
M.B. Number
1-1-28
Distinctive Ringing by Telephone or CO Selection
N
1. Receiving Volume Down:
Multiline Terminal: The volume (increased by
Single Line Telephone: Normal.
2. Receiving Volume Up:
Multiline Terminal: The volume (increased by
Single Line Telephone: The volume is increased 6 dB.
3. This feature applies to internal and external calls.
4. Telephone ports A0~C0 are ports 100~120.
Receiving Volume Selection
Setting
Title
Data
D O W N
D I S P L A Y
LK 3
LK 4
The shaded area indicates the default setting.
LK 7
LK 8
Memory Block Name
T
+ 2) is reset when you hang up.
T
+ 2) is not reset when you hang up.
May 2003
4-92
System Mode
4
Submode
—
Data No.
92
PC Programming
a
+BTT
1 - 385