NEC Xen Master Programming Manual page 120

NEC Business Solutions Ltd
Code Restriction Class Assignment
when Lockout is Set
General Description
Use this Memory Block to assign the Code Restriction Class when a station user sets the
Station Lockout or when the Attendant sets Attendant Station Lockout.
Display
Data
No.
7 0 : R E S T
T I M E
Programming Procedures
1 Go off-line.
GK
2 Press LK1 + LK1 +
3 Used dial pad to enter class restriction.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K I
~ to enter numeric data
N
4 Press to write selected data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
Refer to Section 6 Code Restriction in this chapter.
N
When a station is locked out, the Code Restriction Class Assignment of this Memory Block is used instead of the Code
Restriction Class assigned in Memory Block 4-07, Code Restriction Class Assignment (Day Mode) or 4-08, Code
Restriction Class Assignment (Night Mode).
1 - 102
Title Setting
1~7 Data
C L A S S = 0 1
D I S P L A Y
to access the Memory Block.
Memory Block Name
Code Restriction Class Assignment when Lockout is Set
Xen Master & Xen Axis
System Mode
1
Submode
1
Data No.
70
PC Programming
a
+AC
Default Values
Class 01
1-1-70