NEC Xen Master Programming Manual page 46

NEC Business Solutions Ltd
LK 7 ETU Mode
Data
Memory Block Name
No.
1 Card Interface Slot Assignment
2 Telephone Type Assignment
3-00 MIF (ACD) Assignment
3-01 MIF (LCR) Assignment
3-02 MIF (SMDR) Assignment
3-03 MIF (UCD) Assignment
3-04 MIF (Caller ID) Assignment
LK 8 Special Mode
Data
Memory Block Name
No.
1 ROM Version Confirmation
2 System Speed Dial Memory Clear
3 Station Speed Dial Memory Clear
8-800 Second Initialisation
— Clock/Calendar Setting
S 4
ECTION
P
ROGRAMMING
S D
YSTEM ATA
1 - 28
Default Value
Refer to Card Interface Slot Assignment on page 1-403..
Telephone
No Assignment (00)
No Assignment (00)
No Assignment (00)
No Assignment (00)
No Assignment (00)
Default Value
Refer to ROM Version Confirmation on page 1-415.
Refer to System Speed Dial Memory Clear on page 1-417.
Refer to Station Speed Dial Memory Clear on page 1-418.
Refer to Second Initialisation on page 1-419.
N/A
This section provides detailed instructions for programming individual Memory
Blocks. The Memory Blocks are listed numerically. For each Memory Block, the
following information is provided.
General Description provides a brief explanation of the function of the
Memory Block.
Display represents the default information displayed in the Multiline
Terminal LCD during programming.
Settings (when applicable) provides the information that is entered using
the line keys on the Multiline Terminal.
Programming
programming the Memory Block.
Related Programming (where applicable) provides a list of associated
Memory Blocks that may need to be programmed.
Notes provides additional information related to programming the Memory
Block.
NON
Telephone
DSS Console
SLT Adapter
Digital Voice Mail
00~02 (MIFA PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
00~02 (MIFM PKG Assigned Port No.
N/A
provides
Procedures
Xen Master & Xen Axis
Programming Values
Programming Values
detailed procedures
Multiline Terminal Programming
for