NEC Xen Master Programming Manual page 410

NEC Business Solutions Ltd
Programming Procedures
1 Go off-line.
N
2 Press LK5 + +
3 Press the corresponding CO/PBX line key to change the data option. Operation data includes:
CO/PBX
Line LED
Data
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
S
to go to the next page
T
to go to the previous pag
R
to go to the next Trunk Group No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
3-03
4-09
N
Tandem connection of Trunk Group-to-Trunk Group must be specified separately.
1 - 392
KA
to access the Memory Block.
Off On
No Yes
e
There is no default setting.
Memory Block Name
Trunk-to-Trunk Group Assignment
Telephone to Tenant Assignment
Tie Line Networking Tandem Connection Assignment
Xen Master & Xen Axis