NEC Xen Master Programming Manual page 527

Programming Manual
This option is only available when a configuration file is open.
Change Password
Allows the user to change the MAT password.
Print
Provides two print options: Job Specifications and Designation Labels (requires a
standard inkjet or laser printer).
When Job Specifications is selected, a menu is displayed. There are three options
for printing the Job Specifications: printing a family (group) such as system-wide,
trunk group, or tenant, printing a range of Memory Blocks, or printing an individual
Memory Block.
When Designation Labels is selected, MAT automatically opens the DESI for
Windows label printing application.
automatically exported to DESI. Labels can then be configured and printed for the
telephones. This requires the NEC LASER Labels for printing on InkJet or Laser
printers.
For the Designation Labels option to be enabled, the DESI for Windows
application must be installed on your computer. Installation is usually done
during the installation of MAT.
Print Setup
Allows access to the printer setup screen. This allows the printer configuration to
be modified.
Recent File
Displays the last two files that were opened. These are listed as 1 and 2. The user
can select either file to open. This option is only available when New or Open is
selected.
Exit
Exits the programming software. If changes have not been saved, the technician is
prompted to save the changes before the program shuts down.
The current telephone information is
May 2003
1 - 509