NEC Xen Master Programming Manual page 33

LK 1 System Mode
LK 3 SLT (Continued)
Data
Memory Block Name
No.
08 Voice Mail DTMF Delay Timer
Selection
09 Voice Mail Disconnect Time Selection
10 Voice Mail DTMF Duration/Interdigit
Time Selection
LK 1 System Mode
LK 4 Transfer/Automated Attendant (A.A.)
Data
Memory Block Name
No.
00 Tandem Transfer Automatic Disconnect
Timer Selection
01 Automated Attendant First Digit PBR
Release Timer Selection
02 Automated Attendant Transfer/DID
Line - Delayed Ringing Time Selection
03 Automated Attendant No Answer
Disconnect Time Selection
04 Tandem Transfer SMDR Print
Extension Assignment
05 Automatic Tandem Trunk by Night
Mode Selection
08 Automated Attendant PBR Timeout
Response Selection
09 Automated Attendant PBR Start
Time Selection
11 Automated Attendant Message Day/
Night Mode Selection
12 Automated Attendant Message to
Tenant Assignment
13 Automated Attendant Answer Delay
Time Assignment
14 Automated Attendant Message Access
Code (1-Digit) Assignment
Programming Manual
Default Value
1 sec.
1.5 sec.
110/80 ms.
Default Value
1 hr.
10 sec.
No Limit
2 min.
Tel No. 999
No
Normal Call
FR
No
All Automated
Attendant Messages:
Tenant Number 00
4 sec.
Refer to Automated Attendant Message Access Code (1-Digit)
Assignment on page 1-159.
Programming Values
0 sec., 1 sec., 2 sec., 3 sec., 4 sec.,
5 sec., 6 sec., 8 sec.
0.5 sec., 1 sec., 1.5 sec., 2 sec.,
3 sec., 3.5 sec.
60/70 ms., 110/80 ms., 410/100 ms.,
610/100 ms., 810/190 ms.
Programming Values
30 min., 1 hr., 2 hr., 3 hr.
5 sec., 10 sec., 20 sec., 30 sec., 40 sec.,
50 sec., 60 sec.
10 sec., 20 sec., 30 sec., No Limit
1 min., 2 min., 3 min., 4 min.
2-digit = 00 ~99
3-digit = 000 ~999
4-digit = 0000 ~9999
Yes, No
Normal Call, Release
FR = Same Time as Greeting
AF = After Greeting
Yes, No
LK01~08 Assigned to CO/PBX Lines 01~08
00~99 sec., per MSG 1~8
May 2003
1 - 15