Table of Contents
Advertisement
G.3.3 mtmsgdata - alarm and message definition data
Usage
mtmsgdata is used to describe all messages and alarms in the system.
Components
The data type mtmsgdata has the following components:
Identifier
Data type: string
System unique string that gives the possibility to point to a specific message.
Category
Data type: icondata
Describes which alarm category the alarm has. Messages that's not of any alarm
type has an empty category data.
StationName
Data type: string
Name of the station to which the alarm belongs to. This could be used to sort or
group alarms better, for example in an HMI.
Number
Data type: num
Message number will be shown as part of the alarm number in alarm lists. Can
also be a way to keep structure of the messages, but not mandatory to use this.
Domain
Data type: num
Message domain number. This is not mandatory, could be used to group alarms
in a different way (maybe a bigger type of group than station level).
Header
Data type: string
Header text for the message.
Text1
Data type: string
First text line of body text for the message.
Text2
Data type: string
Second text line of body text for the message.
Text3
Data type: string
Third text line of body text for the message.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
G FlexLoader Library Add-in reference
G.3.3 mtmsgdata - alarm and message definition data
© Copyright 2014-2020 ABB. All rights reserved.
RobotWare - OS
Continues on next page
273
Advertisement
Table of Contents
