Other Maintenance - ABB FlexLoader SC 6000 Product Manual

9 Maintenance

9.6 Other maintenance

9.6 Other maintenance
Clean the camera optics
What: Clean the camera optics.
When: When the image quality is reduced by dirt.
How: Wipe the front of the object using a clean cloth. If this is not sufficient, use
pure alcohol or similar. Ensure not to leave any streaks on the lens.
Clean the computer screen
What: Carefully wipe the screen off using a damp cloth.
When: As necessary.
Marking unit
What: Clean the stylus pin guide and the stylus assembly regularly.
When: Depends on amount of dust and dirt in the cell. Every month.
How: Unplug the marking machine. Unscrew the stylus pin guide (see marking unit
manual). Remove the stylus, the spring and the core. Clean all parts and remove
the grease. Lubricate the stylus and the stylus pin guide using the oil supplied with
the marking unit. Reassemble the machine and manually fasten the stylus pin
guide. Note : please pay attention to the direction when reassembling the core
(see marking unit manual). Avoid dust and abrasive particles on the guiding and
driving elements.
Windows updates
What: Download and install of Windows updates.
When: Windows updates are downloaded and installed by standard Windows
functionality as long as the PC has internet connectivity.
How: Normally no user interaction is necessary. If the system needs to restart this
is performed by standard windows functionality.
142
Note
If you happen to change the camera position, perform a new calibration.
Note
Feature updates shall not be installed on the PC. This is defined by deselecting
the "Defer feature updates" switch.
© Copyright 2014-2020 ABB. All rights reserved.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D