Table of Contents
Advertisement
3 Installation
3.4 Pneumatic installation
3.4 Pneumatic installation
Connection point
Connect the incoming air connection to the FlexLoader SC 6000 at the indicated
connection point at the FlexLoader SC 6000 upper rim. The incoming air must be
6 bar / 87 psi. Dry air, no oil.
xx1900000364
FlexLoader SC 6000 connection point compressed air
Air preparation adjustment
The pressure switch and the safety valve have been pre-configured with suitable
settings. For detailed information, see
44
© Copyright 2014-2020 ABB. All rights reserved.
Air preparation units on page
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
160.
Advertisement
Table of Contents
