Mt_Updatemessagetextsifneeded - Reads Messages Into Message Array If Needed - ABB FlexLoader SC 6000 Product Manual

G.1.18 MT_UpdateMessageTextsIfNeeded - Reads messages into message array if needed
G.1.18 MT_UpdateMessageTextsIfNeeded - Reads messages into message array
if needed
Usage
MT_UpdateMessageTextsIfNeeded is used to read message texts of used
language into message array if file was changed since last read or if a read is asked
anyway.
Basic examples
The following example illustrates the instruction
MT_UpdateMessageTextsIfNeeded.
Example 1
This will always update message texts from files to RAPID system.
Arguments
ForceLoading)
Data type: switch
Use if texts always should be updated independent of changes to language settings
or file modifications.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
MT_UpdateMessageTextsIfNeeded\ForceLoading;
MT_UpdateMessageTextsIfNeeded(\ForceLoading)
© Copyright 2014-2020 ABB. All rights reserved.
G FlexLoader Library Add-in reference
RobotWare - OS
245