10 Repair
10.3 Illumination
10.3 Illumination
Exchange of illumination units is described in the maintenance section.
In rare cases, the complete luminaires have to be exchanged. Use the following
procedure:
xx1900000390
Layout of luminaires and camera
148
DANGER
Prior to work with the illumination:
Safely shut the power to the FlexLoader SC 6000 down and lock against accidental
turn-on.
•
Identify the defect luminaires.
•
Remove the fluorescent tube and the reflector.
•
Remove the inner protection housing.
•
Loosen the power cables.
•
Remove the luminaires.
•
Replace by the new luminaires and assemble in reverse order.
© Copyright 2014-2020 ABB. All rights reserved.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D