Further Integration Steps - ABB FlexLoader SC 6000 Product Manual

4 Commissioning

4.4.3 Further integration steps

4.4.3 Further integration steps
The pre-configured robot software for FlexLoader SC 6000 contains suggestions
for a working application skeleton.
If you for some reason would lose the pre-installation and pre-configuration data
of the robot system, you can find a primary backup on the FlexLoader Vision system
harddisk. See
72
Tip
Please follow the suggestions in the section about robot program for building
your own applications, see
of the FlexLoader Vision manual is strongly recommended.
Note
Immediately after initial commissioning, start maintaining your own system
backups.
Software on page 164
© Copyright 2014-2020 ABB. All rights reserved.
RAPID program on page
for detailed information.
Product manual - FlexLoader SC 6000
91. Further in-depth reading
3HAC051768-001 Revision: D