Table of Contents
Advertisement
4.8 Deburring/grinding unit
The deburring/grinding unit is a standard FlexLoader SC 6000 option. The hardware
consists of an Atlas Copco pneumatic die grinder LSF28 ST030E and a Nitto
pneumatic filer ASH-900.
These units can be equipped by any suitable tools according to the customer
needs.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
DANGER
The original risk assessment allows users to run the deburring/grinding tools
under the assumption that no irreversible damage can occur.
If other tools are used, this risk assessment has to be re-evaluated by the
integrator/user of the FlexLoader SC 6000.
© Copyright 2014-2020 ABB. All rights reserved.
4 Commissioning
4.8 Deburring/grinding unit
77
Advertisement
Table of Contents
