Table of Contents
Advertisement
10 Repair
10.2 Conveyors
10.2 Conveyors
Exchange of conveyor belt
Exchange a conveyor belt by the following procedure
xx1900000385
Continues on next page
144
DANGER
Prior to all work with the conveyors:
After positioning the belts in suitable positions, safely shut the power to the
FlexLoader SC 6000 down and lock against accidental turn-on.
•
Run the belt to a suitable exchange position. The belt splice should be close
to the end of the conveyor.
•
Remove the relevant protection cover at the end of the belt (see illustrations
below).
•
Reduce belt tension by releasing the tensioning screws (see illustrations
below).
•
Remove the idler drum below the middle of the conveyor (see illustrations
below).
© Copyright 2014-2020 ABB. All rights reserved.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
Advertisement
Table of Contents
