Table of Contents
Advertisement
6 Function description
6.1 Overview
FlexLoader SC 6000 is a module based automation cell for handling parts in
machine tending applications. The system can easily be adapted to the requirements
of the customer.
In a typical application FlexLoader SC 6000 is integrated with a machine tool. The
operator places parts on a conveyor belt that acts as a buffer. The robot picks the
parts from the conveyor belt. A vision system with camera that is located above
the conveyor belt guides the robot to the correct grip position. After that all parts
under the camera have been picked, the conveyor belt feeds new parts forward.
FlexLoader SC 6000 can be configured with a variety of useful options. Please
refer to Product specification - FlexLoader SC 6000 for further details.
Functional units
FlexLoader SC 6000 contains numerous mechanical devices and sensors that are
important to know about in order to understand the function.
The FlexLoader SC 6000 consists of the following main parts:
xx1900000374
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
WARNING
Appropriate training is required in order to use FlexLoader SC 6000. Incorrect
use of the product can lead to personal injury and material damage.
Before commissioning the product, it is your responsibility to carefully read the
chapter about safety and to be familiar with the safety devices, see
page
13.
© Copyright 2014-2020 ABB. All rights reserved.
6 Function description
6.1 Overview
Safety on
Continues on next page
83
Advertisement
Table of Contents
