Table of Contents
Advertisement
2 Safety
2.2 Safety during installation, commissioning and decommissioning
2.2 Safety during installation, commissioning and decommissioning
Always check that the installation and maintenance instructions are supplied
together with the machine. Carefully read the safety information, before unpacking
and installing the equipment.
Personnel who are involved in the installation and commissioning must have
relevant training for the respective robot and corresponding safety issues.
14
WARNING
Maintain established good work practices with regard to robot safety.
Ensure that nobody is within the safeguarded area during automatic operation.
CAUTION
It is forbidden to enter the conveyor. Ensure that nobody is on the conveyor,
especially when the belt is in motion.
CAUTION
It is forbidden to step on the illumination roof, the outer walls of the FlexLoader
SC 6000 and on any FlexLoader SC 6000 option.
© Copyright 2014-2020 ABB. All rights reserved.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
Advertisement
Table of Contents
