Table of Contents
Advertisement
9 Maintenance
9.2 Mechanical maintenance
9.2 Mechanical maintenance
FlexLoader SC 6000 overall cleaning
What: Overall cleaning of the FlexLoader SC 6000.
When: Once / week. More often if needed.
How: Let the robot move to its home position (-> entry request). Clean all surfaces
from chips, oil and other material that might disturb correct function. Vacuum clean
with industrial grade vacuum cleaner. Be careful when cleaning inside.
Robot, mechanical maintenance
What: Refer to the product manual of the robot for more information.
Clean the conveyor belt
What: Clean the conveyor belt.
When: Vacuum the felt belts at least once a week. Clean all other belts every day.
How: Felt belts should be vacuumed. All other belts are cleaned with a soap solution
and a cloth. Run the belt to be able to clean the entire belt.
Check the conveyor belt
What: Check the conveyor belt.
When: Every week.
How: Run the conveyor belt and check that the belt does not slip at the motor drum
nor moves sideways.
Adjust the conveyor belt
What: Adjust the conveyor belt.
When: When it starts to move sideways or slacken.
How: Refer to the installation sections for belt adjustment and belt tension.
Clean the air cleaning box (option)
What: Clean the air cleaning box.
When: Every week. More often if needed, for example when performing intense
deburring.
How: Remove all chips and material from the deburring units. Vacuum clean with
an industrial grade vacuum cleaner. Remove oil and dirt from deburring tools and
their holders.
Check the gripper system
What: Check the gripper system.
When: Every month.
How: Visually check the gripper system, including gripper holder, gripper finger
holders and gripper fingers, for signs of mechanical wear. Replace damaged or
worn parts.
Continues on next page
136
© Copyright 2014-2020 ABB. All rights reserved.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
Advertisement
Table of Contents
