Machine Tool - ABB FlexLoader SC 6000 Product Manual

4.5 Machine tool

The FlexLoader SC 6000 system provides a framework for handling the most
common machine tool interface types.
Interaction with the machine tool is handled by a machine tool specific module
(TemplateMachine.sys). This module translates the actual machine tool
communication signals into a standardized set of commands to be understood by
FlexLoader SC 6000.
This standardized set of commands can be expanded and adapted. Due to the
large variety of machine tool interfaces and integrator needs, it is the integrators
responsibility to implement this interface module.
See
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
RAPID program on page 91
© Copyright 2014-2020 ABB. All rights reserved.
for further implementation suggestions.
4 Commissioning
4.5 Machine tool
73