Commissioning; User Accounts - ABB FlexLoader SC 6000 Product Manual

4 Commissioning

4.1 User accounts

General
FlexLoader Vision
The FlexLoader Vision system has two default user accounts:
For operation
User name
FlexLoaderVision
For adminstration
User name
FlexLoaderAdmin
Robot
Default credentials according to ABB default settings.
User name
Default User
Safety related work (i.e. SafeMove) is performed with the SafetyUser account.
User name
SafetyUser
Follow ABB's advice for administration of user permissions.
Pluto
The Pluto program normally does not need to be opened or changed. Information
on download and reconfiguration of the software together with the passwords
needed in case it would be necessary to make changes are found in the FlexLoader
Standard Safety manual.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
Note
There are several default user accounts used in FlexLoader SC 6000. It is strongly
recommended to change the default passwords to reduce the risk of unauthorized
access to important system parameters.
Follow ABB's advice for administration of user permissions.
Note
Please refer to the section on cyber security in the robot Integrator's guide for
additional information.
© Copyright 2014-2020 ABB. All rights reserved.
4 Commissioning
4.1 User accounts
Password
FlexLoaderVision
Password
FlexLoaderAdmin
Password
robotics
Password
SafetyUser
57