Overview Of This Manual - ABB FlexLoader SC 6000 Product Manual

Overview of this manual

About this manual
FlexLoader SC 6000 is a standard cell used for machine tool tending. This manual
describes how to install, operate, maintain, service and troubleshoot the FlexLoader
SC 6000.
Usage
This manual should be used during:
Who should read this manual?
This manual is intended for:
Prerequisites
Operators and maintenance, repair and installation personnel working with an ABB
robot must be trained by ABB and have the required knowledge of mechanical and
electrical installation, service and maintenance work.
Trademarks
FlexLoader is a trademark of ABB.
References
Reference
Product specification - FlexLoader SC 6000
Product manual - FlexLoader Vision
Product manual - IRB 2600
Product manual - IRB 4600
Product manual - IRC5 Panel Mounted Controller
Application manual - FlexLoader Standard Safety Center
Revisions
Revision
A
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
• installation and preparation work
• maintenance work
• repair work
• service work
• operation.
• installation personnel
• maintenance personnel
• repair personnel
• service personnel
• operators.
Description
First edition.
© Copyright 2014-2020 ABB. All rights reserved.
Overview of this manual
Document ID
3HAA009719-001
3HAC051771-001
3HAC033453-001
3HAC033453-001
3HAC027707-001
3HAC051769-001
Continues on next page
9