Decommissioning; General - ABB FlexLoader SC 6000 Product Manual

12 Decommissioning

12.1 General

Introduction
This section contains information to consider when taking a product, robot or
controller, out of operation.
It deals with how to handle potentially dangerous components and potentially
hazardous materials.
When decommissioning the FlexLoader SC 6000, start with decommissioning of
the robot according to the robot product manual.
Disposal of storage media
Before disposal of any storage equipment (anything from an SD card to a complete
controller), make sure that all sensitive information has been deleted.
Product manual - FlexLoader SC 6000
3HAC051768-001 Revision: D
Tip
To remove all data from the SD card, use the Clean Disk function (part of
Recovery Disk function) in RobotStudio. See Operating manual - RobotStudio.
© Copyright 2014-2020 ABB. All rights reserved.
12 Decommissioning
12.1 General
169