Table of Contents
Advertisement
C-8
C-8
General Description
This feature provides visual indications at the ATTENDANT CONSOLE [A-3] of all calls being handled by the
Attendant.
Operating Procedure
None.
Service Conditions
Each ATTENDANT CONSOLE [A-3] is provided with 6 dedicated switched loop keys. Each loop key is associated
with 5 lamp indicators (BUSY, RING, ATND, ANSWER, or HOLD) to display the status of the call on that loop.
The indicators may be ON, OFF or flashing (400 ms ON and 400 ms OFF).
Interactions
1.
When the ATTENDANT LOOP RELEASE [A-6] feature is activated, the status of the call is removed
from the ATTENDANT CONSOLE [A-3] until alerted by the AUTOMATIC RECALL [A-8] feature.
2.
See DIGITAL DISPLAY-STATION [D-5], DIGITAL DISPLAY-TRUNK [D-6], and ATTENDANT
LOOP RELEASE [A-6].
Programming
No programming is required.
These indications are generic to the system and are enabled when the Attendant Console is programmed.
Note:
FCCS Programming
No unique programming is required for the FCCS network.
Page 156
Call Processing Indication
Call Processing Indication
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
