Table of Contents
Advertisement
A-60
FCCS Programming (cont'd)
STEP 3:
ALGNN - This command must be set to the NCN.
STEP 4:
ASATN - This command must be set to the NCN. Assign identification numbers to the specific
Attendant Consoles.
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Page 54
Attendant-To-Attendant Calling
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
