Table of Contents
Advertisement
Programming
STEP 1:
ASYD - System Data 1, Index 142. For CALL PARK recall, the Miscellaneous Timer Counter is
assigned in bits 0-3. The Timer Class is assigned in bits 4-6. Timer Class of 3=2 seconds. Timer
Counter of 4=30 seconds.
System Data 2, Index 1, bit 0 & 1. CONSULTATION HOLD - ALL CALLS [C-17] allowed or
denied. 00: Denied; 01: Originating and Terminating Calls allowed, Tandem Call Denied; 11: All calls
allowed.
STEP 2:
ANPD - Reserve a number level for feature access and retrieval. Assign for Normal (N), Hooking (H),
and Busy (B). Assign NND in accordance with a predetermined numbering plan.
STEP 3:
ASPA - Assign an access code to:
CALL PARK access code, SRV = SSC (Service Code), SID = 61, Connection Index of Hooking (H),
CI = H.
CALL PARK local retrieval code, SRV = SSC (Service Code), SID = 62, Connection Index of Normal
(N).
CALL PARK remote retrieval code, SRV = SSC (Service Code), SID = 63, NND = number of digits in
the access code, and assign a Connection Index of Normal (N).
STEP 4:
ASFC - Assign a Service Feature Class that allows SFI 67 to the applicable stations. This allows the
station to park a call and to retrieve a parked call. Assign stations a Service Feature Class that allows
SFI 68, CALL PARK called. This allows a station to be parked by another station or Attendant
Console.
STEP 5:
ASAT - This command must be assigned to designate a specific station number to the Attendant
Console. This number is used to identify the Attendant Console when parking a call.
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ANPDL - Reserve a number level for feature access and retrieval. Assign for Normal (N), Hooking
(H), and Busy (B). Assign NND in accordance with a predetermined numbering plan.
STEP 2:
ASPAL - Assign an access code to:
CALL PARK access code, SRV = SSC (Service Code), SID = 61, FPC = "x", Connection Index of
Hooking (H), CI = H.
CALL PARK local retrieval code, SRV = SSC (Service Code), SID = 62, FPC = "x", Connection
Index of Normal (N).
CALL PARK remote retrieval code, SRV = SSC (Service Code), SID = 63, FPC = "x", NND =
number of digits in the access code, and assign a Connection Index of Normal (N).
STEP 3:
ASATN - This command must be assigned to designate a specific station number to the Attendant
Console. This number is used to identify the Attendant Console when parking a call.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
TC = 3: 2 Second Increments
TC = 4: 30 Second Increments
Note 1
Call Park
Timer Class
Misc. Timer Counter
C-29
Page 209
Advertisement
Table of Contents
